Kaneka Neurovascular USA. Distributed by Kaneka Medical America LLC For U.S. healthcare professionalsIndications & SafetyFollow on LinkedIn
The Systemi-ED CoilSurfRider 13WaveSelect 1014Toro 88EvidenceimpossibleResourcesAboutRequest a Rep
Navigation / The access

Read the wave.
Ride the line.

SurfRider 13 is a low-profile 0.013 in ID microcatheter with dual distal markers and DMSO compatibility. Designed to navigate. Built to deliver.

Rx Only
SurfRider 13
0.013inDistal ID
1.7FDistal OD
165cmWorking length
2Distal markers
Go small. Stay versatile.

Built for the distal case.

2 markers

Confirm position during coil delivery.

Two distal markers, 3 cm apart with a tip length of 0.8 mm or less. "The additional marker made it easier to confirm catheter position during i-ED coil deployment," said Dr. Alfred See of Boston Children's Hospital.

SurfRider 13 distal tip
1.7F

Low distal profile.

A 0.022 in (1.7F) distal OD with a 0.013 in ID, stepping to 2.8F proximally for support.

2 layers

Braid + braid reinforcement.

Braided distal section, two-layer braid proximally, for trackability that holds position.

DMSO

Coils and liquid embolics.

Compatible with Kaneka i-ED coils and DMSO-based liquid embolics. Onyx was delivered through SurfRider in a three-feeder AVF case.

2 tips

Straight or pre-shaped.

"The pre-shaped configuration worked extremely well," said Dr. Shigematsu. "Even in a vessel with multiple turns, the catheter was delivered without difficulty."

Specifications

SurfRider 13 at a glance.

SpecificationValue
Proximal OD0.037 in (2.8 Fr)
Proximal ID0.015 in
Distal OD0.022 in (1.7 Fr)
Distal ID0.013 in
Dead space0.27 ml
Flexible length25 cm
Coated length100 cm
Working length165 cm
Compatible guidewire max OD0.010 in
DMSO compatibilityCompatible
Marker bandDouble
Distal reinforcementBraid
Proximal reinforcementBraid + braid (2 layer)

Ordering

CodeDescription
N01-13165-STSurfRider 13 Microcatheter, straight tip
N01-13165-PSSurfRider 13 Microcatheter, pre-shaped tip

SurfRider 13 is indicated for delivery of 0.010 in coils and is compatible with the WaveSelect 1014 guidewire and other 0.010 in neurovascular guidewires.

Where it fits

Rides WaveSelect. Delivers the i-ED Coil.

Compatible with 0.010 in coils and the WaveSelect 1014 guidewire. The i-ED SilkySoft line fits through its 0.013 in lumen.

Indications for use

The SurfRider 13 Microcatheter is intended for the introduction of interventional devices, such as embolic coils, or diagnostic agents into the neurovasculature.

Important Safety Information
Evidence

SurfRider 13 in U.S. labs.

All cases

Case results may not be indicative of results in other cases.

Request an evaluation

See SurfRider 13 in your own cases.

Your territory representative will set up product, in-service and case support for your lab.

Rx Only
Prototype form. Submissions are not sent.

Thank you. Your request is in.

Your Kaneka Neurovascular representative for your territory will reach out within one business day.